blast smelting
英 [blɑːst ˈsmeltɪŋ]
美 [blæst ˈsmeltɪŋ]
网络 鼓风冶炼
双语例句
- I have the impression that blast furnace smelting uses coke. It must be used as fuel.
我有一个印象.高炉冶炼要用焦炭。这一定是用作燃料的吧？ - Briefly speaking, the other major raw materials for blast furnace smelting include fuels, fluxes and air.
简单地讲.用于高炉冶炼的原料除了铁矿石外，还有燃料、熔剂和空气。 - Reasonable operational furnace profiles should correspond and match to the manufacture conditions and smelting system according to the blast furnace smelting principle and gas flow distribution law.
合理的操作炉型与生产条件和冶炼制度相对应，并且按照高炉冶炼原理与煤气流运动分布规律相匹配。 - Hot Stove air temperature control level has been noticeably improved, the blast furnace smelting is very important and significant impact.
锅炉风温控制水平也有了明显的提高，对高炉冶炼具有非常重要的影响及重大意义。 - Constant modifications to the bell less top equipment results in quite well effect in blast furnace smelting.
通过对无料钟炉顶设备的不断改进，高炉冶炼取得了较好的效果。 - Effects of High Grog Ratio on Blast Furnace Smelting of Ferro-Manganese Alloy
新钢高熟料比冶炼高炉锰铁效果分析 - So the usage of titanium oxide reduction grade as the index of thickening in blast furnace process is reasonable, and which could represent characteristic of the blast furnace smelting iron ore bearing titanium and vanadium.
因此高炉冶炼过程中用钛氧化物还原度作为判断和控制钛渣变稠的指标能更准确地反映高炉过程特点。 - Influence and control over blast furnace smelting by blast kinetic energy
鼓风动能对高炉冶炼的影响及控制 - In blast furnace smelting process, copper to Nickel ratio in slag were researched by coke ratio, CaO content and SiO2/ Fe in slag, to search a way for raising metals recovery.
在鼓风炉熔炼铜镍特富矿中，从焦率和渣中CaO含量、SiO2/Fe等方面探讨渣中镍铜此，从而提高金属回收率的途径。 - The regenerative reheating furnace is a important assistant equipment of the modern blast furnace smelting, its performance lie on two aspect, one is the combustion efficiency of the gas, another is heat exchange efficiency between the gas and the checker.
蓄热式热风炉作为现代高炉炼铁重要的配套设备，其性能主要由高炉煤气燃烧以及烟气（或空气）与蓄热体之间的换热两个重要过程的效率所决定。 - Review on features of high MgO slag in blast furnace smelting, Laiyuan iron and steel plant Xia Yanhe
涞源钢铁厂高炉高MgO渣冶炼特性的研讨 - The application of the moisture removing blowing technique in blast furnace smelting was presented, and the key technique, creative point and technical parameters of the high-efficiency energy-saving moisture removing device were analyzed. The practice showed that the energy saving efficiency was obvious.
介绍了脱湿鼓风技术在高炉冶炼中的应用，分析了高效节能型脱湿器的关键技术、创新点和技术参数，经运行实践证明节能效果明显。 - A discussion on oxygen-enriched air blast intensified smelting in BF
富氧鼓风强化高炉冶炼的探讨 - Effect of UPC on Energy Distribution and Blast Furnace Smelting Process
未燃煤粉对高炉冶炼过程中能量分配的影响 - Petrographic observation on hematite pellets of EAST-ANSHAN iron ore concentrate in blast furnace smelting
东鞍山浮选赤铁精矿制的球团矿在高炉冶炼中变化的岩相观察 - Study on Mathematical Model for Influence of Blast Furnace Smelting Process Caused by Cohesive Zone
软熔带对高炉冶炼过程影响的数学模型研究 - Kinetics of reduction of niobium oxide and tantalum oxide in fluorine-containing slag in blast furnace smelting
含氟高炉渣中氧化钽和氧化铌的还原动力学研究 - Fuel Combustion in Blast Smelting Process
烟化熔炼过程中的燃料燃烧 - Comprehensive utilization of low grade Ludwigite ore with blast furnace smelting
低品位硼铁矿在高炉冶炼过程中的综合利用 - According to physics-chemistry character of molten slag, on the basis of production experience of blast furnace Smelting Lead, the paper describe the way of lowering Lead containing in Lead blast furnace slag.
分析了熔融炉渣的物理化学性质，在认真总结鼓风炉炼铅生产实践经验的基础上，指出降低铅鼓风炉炉渣含铅的途径。 - Development of Comprehensive Expert System of Blast Furnace Smelting Process
高炉冶炼过程综合专家系统的开发 - Distribution of Nb or TA between fluorine-containing slag and iron in blast furnace smelting
铌、钽在含氟高炉渣、铁中之分配 - The paper studies influence of blast furnace smelting process caused by cohesive zone through the numerical simulation of the gas flow around the cohesive zone of blast furnace and the temperature of charging inside blast furnace what carried out by a two-dimensional axial symmetry mathematical model.
通过软熔带对高炉冶炼过程影响的数学模型研究，建立高炉内煤气流动的二维轴对称数学模型得到了倒V型软熔带附近的气体流动及其炉内炉料温度分布。 - How to optimize the blast furnace smelting parmeters under the condition of rich oxygen blowing is described in the paper. The various measures to improve coke quality under the existing process conditions are discussed.
文中讨论了高炉在富氧喷吹的条件下，如何优化高炉冶炼参数，探讨了现有工艺条件下，提高焦炭质量的各种措施。 - However, because of the complexity of blast furnace smelting, blast furnace internal temperature cannot be measured directly. There was not any temperature model can completely describe the blast furnace smelting process and reflect the state of blast furnace temperature timely.
但是由于高炉冶炼的复杂性，高炉内部温度无法直接测量，同时没有一个温度模型能够很好地从整体上描述高炉冶炼过程，实时反映高炉炉内温度状态。 - Hot blast stove is an important assistant equipment during the blast furnace smelting, whose performance could influence its running normally, use efficiency and lifespan as well hot blast stove.
热风炉是高炉炼铁生产过程中的重要辅助设备，其性能的优劣直接影响到自身和高炉的正常运行、利用效率以及使用寿命。 - Apart from high grade, high strength, perfect size distribution, less powder, the stability of R of sinter also has great influence on blast furnace smelting.
烧结矿不仅要品位高，强度高，粒度组成合理、粉末少，而且烧结矿的碱度稳定对高炉有较大影响。 - The thesis made the following work: analysis of characteristics of blast furnace, blast furnace smelting process and are familiar with the use of partial least squares regression obtained to establish the validity of prediction model.
本论文主要作了以下几个方面的工作：分析高炉冶炼特点，熟悉高炉冶炼过程并得出运用偏最小二乘回归来建立预测模型的有效性。 - The regenerative reheating furnace is an important assistant equipment of the blast furnace smelting. Its task is to supply hot air stably for the blast furnace.
蓄热式热风炉是高炉炼铁重要的配套设备，其主要任务是稳定地向高炉提供热风。 - Sintering practice can remove some harmful impurities, which provides sinter with good metallurgical property for blast furnace smelting and greatly improve economic and technical index of blast furnace production.
烧结生产能去除某些有害杂质，为高炉冶炼提供具有良好冶金性能的烧结矿从而使高炉技术经济指标大大改善。